Insight category · 40 articles · Page 4 of 5
System architecture, sensing, interfaces and acceptance methods.
Article archive
Showing 28–36 of 40
Landslide early warning system design
Design a landslide early warning system from hazard knowledge and multi-sensor monitoring through uncertain thresholds, trusted communication, action, and drills.
Multibeam echosounder survey design and acceptance
Understand and accept a multibeam echosounder survey through the full measurement chain, calibration, coverage, uncertainty, feature detection, and deliverables.
3D traffic radar selection and acceptance
A procurement guide to 3D traffic radar, covering measurement dimensions, point-cloud claims, lane mapping, target classes, interfaces, and site acceptance.
drone detection sensor comparison
Compare radar, RF, EO/IR, acoustic, and Remote ID drone detection by observable signal, silent-target behavior, environment, false alarms, and test evidence.
AUV side-scan sonar survey
Plan an AUV side-scan sonar survey by comparing autonomous, vessel-towed, hull-mounted, and ROV-mounted systems on coverage, resolution, navigation, and cost.
layered border surveillance systems
Design border surveillance around terrain, target classes, radar and EO/IR handoffs, UAV response, communications, privacy, maintenance, and acceptance evidence.
counter-UAS system architecture and procurement
Select a counter-UAS architecture by threat, site geometry, legal authority, sensor handoffs, command workflow, mitigation controls, and acceptance evidence.
integrated mine safety monitoring
Design an integrated mine safety monitoring system across atmosphere, slope, seismic, tailings, personnel, communications, alarm logic, and regulatory evidence.
multimodal roadside traffic sensing
Design and procure roadside radar, video, and infrared fusion with clear modality roles, calibration, event schemas, privacy, cybersecurity, and acceptance tests.
Use an article to define the decision, then share the mission, site and destination for a project-specific review.
Start a technical inquiry